TRIO-PS-2G/1AC/24DC/20 Schaltnetzteil 1-Phasig für Hutschienenmontage
24V Industrie Stromversorgung: Reguliert AC zu DC oder DC zu DC

- Ausgangsspannung: 24 V DC
- Ausgangs-Ampere: 20 Amp
- Ausgangsleistung: 480 W
- Eingangsspannung: Ein-Phasig AC oder DC
- Eingangsspannungsbereich: 85 ... 264 V AC und 99 ... 275 V DC
TRIO-PS-2G/1AC/24DC/20 Industrie Schaltnetzteil ist ein robuster AC zu DC- und DC zu DC-Wandler, der die hohen Stabilitäts- und Effizienzerwartungen der Bereiche Industrie, Maschinenautomation und Prozesskontrolle erfüllt. Dieses Schaltnetzteil (SNT) sorgt für eine regulierte Ausgangsspannung, selbst wenn es im Stromnetz zu Spannungsschwankungen kommen sollte. TRIO Stromversorgungen verfügen über alle zur Unterstützung von ITE (informationstechnische Geräte) erforderlichen Sicherheitszertifikate, robuste Verpackung, erweiterte Betriebstemperaturbereiche, hohe Spitzenlasten und hohe Isolationsspannungen und können dadurch die Anforderungen Ihrer industriellen Anwendung erfüllen.
150% Dynamischer Power Boost

Der Dynamische-Boost bietet zusätzliche Leistung zur Inbetriebnahme schwieriger Lasten. Mit 5 Sekunden lang bis zu 150% des Nennstroms startet TRIO-PS-2G/1AC/24DC/20 Stromversorgung schwierige Lasten zuverlässig.
24 bis 28 V DC Verstellbare Ausgangsspannungsbereiche
Mithilfe des Drehpotentiometers an der Vorderseite der TRIO-PS-2G/1AC/24DC/20 Stromversorgung kann die Ausgangsspannung optimal auf Anforderungen der jeweiligen Anwendung angepasst werden. So können Sie sie zum Beispiel ganz einfach anpassen, um den von einem langen Kabel verursachten Spannungsabfall auszugleichen.
Industrielle Betriebstemperatur von -25°C bis +70°C mit zuverlässiger Inbetriebnahme des Geräts bei -40°C
Geräte in den Bereichen Verkehrsmanagement, Öl- und Gaspipelines, Wetterverfolgung, industrielle und Outdoor-Anwendungen müssen bei Temperaturen funktionsfähig bleiben, die von kommerziellen Stromversorgungen nicht getragen werden. Bei einer Betriebstemperatur von -25°C bis +70°C und einer zuverlässigen Inbetriebnahme des Geräts bei -40°C ist die TRIO-PS-2G/1AC/24DC/20 Stromversorgung ideal für Geräte, die rauen Umgebungen und extremen Temperaturen ausgesetzt sind.
Hohe Effizienz und niedrige Leistungsaufnahme bei Nulllast
Im Vergleich zu anderen Produkten auf dem Markt bietet die TRIO Stromversorgung hervorragende Energieeinsparungen. Dank der sehr niedrigen Leistungsaufnahme bei Nulllast und hoher Effizienz bei Nennlast wird nur eine geringe Menge an elektrischer Energie in unerwünschte Wärmeenergie umgewandelt, wodurch diese Stromversorgungen besonders umweltfreundlich sind.
Einfache und effiziente Installation

Die Steckverbindung kommt ohne Werkzeug aus, spart Zeit und ermöglicht eine schnelle und einfache Installation. Und der schmale Hutschienen-Gehäusesteg spart Platz im Schaltschrank.
Ideale Anwendungsumgebungen für TRIO-PS-2G Schaltnetzteile für Hutschienenmontage:
- Maschinenbau
- Automatisierter Produktionsablauf
- Industriesteuerung, Automatisierung, Montage und Prüfgeräte
- Baukontrolle, Sicherheit und Überwachung und Klimaanlagen
- Stromversorgung von vielen Industrieautomatisierungsgeräten wie Sensoren, Controllern und Ventilen
Weitere Gründe sich für TRIO-PS-2G/1AC/24DC/20 Stromversorgungen zu entscheiden:
- Kontaktsignalausgang und LED-Anzeige für Spannungsausfall: Wenn die Ausgangsspannung unter dem Betriebsbereich liegt, schaltet die LED-Leuchte sich aus und der Kontakt wird geöffnet
- Vibrationsfestigkeit bis einschließlich 4 kg
- Schockfestigkeit bis einschließlich 30 g
- Spannungsisolierung Eingang/Ausgang: 3 kV-AC
- Schutzvorkehrungen: Kurzschluss, Überlast, Überspannung, Übertemperatur
- Hohe MTBF (mittlerer Ausfallabstand)-Werte von mehr als 1 Million Stunden bei + 40°C sorgen für maximale Verfügbarkeit
- IEC-Schutzklasse II Stromversorgungen
Environmental Product Compliance | |
---|---|
REACH SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 25; |
General | |
Net weight | 1.5 kg |
Efficiency | > 93 % (for 230 V AC and nominal values) |
Insulation voltage input/output | 3 kV AC (type test) |
1.5 kV AC (routine test) | |
Protection class | I (in closed control cabinet) |
Degree of protection | IP20 |
MTBF (IEC 61709, SN 29500) | > 1800000 h (25 °C) |
> 1000000 h (40 °C) | |
> 480000 h (60 °C) | |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm |
Standards and Regulations | |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 55011 (EN 55022) |
Noise immunity | EN 61000-6-2:2005 |
Standards/regulations | EN 61000-4-2 |
Contact discharge | 4 kV (Test Level 2) |
Standards/regulations | EN 61000-4-3 |
Frequency range | 80 MHz ... 1 GHz |
Test field strength | 10 V/m (Test Level 3) |
Frequency range | 1.4 GHz ... 2 GHz |
Test field strength | 3 V/m (Test Level 2) |
Standards/regulations | EN 61000-4-4 |
Comments | Criterion B |
Standards/regulations | EN 61000-6-3 |
EN 61000-4-6 | |
Frequency range | 0.15 MHz ... 80 MHz |
Voltage | 10 V (Test Level 3) |
Low Voltage Directive | Conformance with LV directive 2006/95/EC |
Standard - Safety of transformers | EN 61558-2-16 (air clearances and creepage distances only) |
Standard - Electrical safety | IEC 60950-1/VDE 0805 (SELV) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Standard – Safety extra-low voltage | IEC 60950-1 (SELV) and EN 60204-1 (PELV) |
Standard - Safe isolation | DIN VDE 0100-410 |
Standard – Limitation of mains harmonic currents | EN 61000-3-2 |
UL approvals | UL Listed UL 508 |
UL/C-UL Recognized UL 60950-1 | |
Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz ... 150 Hz, 4g, 90 min. | |
Rail applications | EN 50121-4 |
GL | GL applied for |
Connection data, input | |
Connection method | Push-in connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 4 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 10 mm |
Output data | |
Nominal output voltage | 24 V DC ±1 % |
Setting range of the output voltage (USet) | 24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) | 20 A |
Dynamic Boost (IDyn.Boost) | 30 A (5 s) |
Derating | > 60 °C ... 70 °C (2.5%/K) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | yes |
Feedback resistance | ≤ 35 V DC |
Protection against surge voltage on the output | ≤ 30 V DC |
Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) | |
< 0.1 % (change in input voltage ±10 %) | |
Residual ripple | < 30 mVPP (with nominal values) |
Output power | 480 W |
Typical response time | < 1 s |
Maximum power dissipation in no-load condition | < 5.7 W |
Power loss nominal load max. | < 44 W |
Connection data for signaling | |
Connection method | Push-in connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 1.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 1.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 16 |
Stripping length | 8 mm |
Dimensions | |
Width | 68 mm |
Height | 130 mm |
Depth | 160 mm |
Weight per piece | 1675.8 GRM |
Input data | |
Nominal input voltage range | 100 V AC ... 240 V AC |
110 V DC ... 250 V DC | |
Input voltage range | 100 V AC ... 240 V AC -15 % ... +10 % |
99 V DC ... 275 V DC | |
Dielectric strength maximum | ≤ 300 V AC 15 s |
AC frequency range | 50 Hz ... 60 Hz ±10 % |
Discharge current to PE | < 3.5 mA |
Current consumption | 5.6 A (100 V AC) |
4.3 A (120 V AC) | |
2.4 A (230 V AC) | |
2.4 A (240 V AC) | |
Nominal power consumption | 534.7 VA |
Inrush surge current | ≤ 20 A (typical) |
Mains buffering | typ. 10 ms (120 V AC) |
typ. 15 ms (230 V AC) | |
Input fuse | 10 A (internal (device protection)) |
Choice of suitable circuit breakers | 10 A ... 16 A (Characteristics B, C, D, K) |
Power factor (cos phi) | 0.98 |
Type of protection | Transient surge protection |
Protective circuit/component | Varistor |
Connection data, onput | |
Connection method | Push-in connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 10 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 6 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 8 |
Stripping length | 15 mm |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) |
Ambient temperature (start-up type tested) | -40 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Climatic class | 3K3 (in acc. with EN 60721) |
Degree of pollution | 2 |
Installation height | ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m) |
Approvals | |
|
TRIO-PS-2G/1AC Industrial Power Supply Block Diagram |
---|
![]() |